Bandwidth: 50 MHz - 200 MHz
Analog Channels: 2
Sample Rate: 1 GS/s
Bandwidth: 50 MHz - 200 MHz
Analog Channels: 2
Sample Rate: 1 GS/s
Bandwidth 70 MHz - 200 MHz
Analog Channels 2-4
Sample Rate : 1 GS/s to 2 GS/s
8 analog/spectral channels or 64 digital
6.25 GS/s sample rate
1 GHz bandwidth
Closed Embedded OS only
Supports probes
50 Ohm and 1 MOhm inputs
4 analog/spectral channels
25 GS/s sample rate
1 GHz to 8 GHz bandwidth (upgradable)
2 GHz RF HW Digital-Down-Converter
Closed Embedded OS or Windows 10 OS
Run Self-Calibrate (SPC) with signals connected
An Isolated probe uses galvanic (optical) or RF isolation to divorce the reference voltage of the probe from the reference voltage of the oscilloscope (typically Earth Ground). This enables power designers to accurately resolve high bandwidth, high voltage differential signals in the presence of large common mode voltages.
The DPO7OE series optical probes with a DPO70000 real-time scope deliver the best performance
Power rail probes offer low noise, low loading, high bandwidth, and high DC offset specifically for power integrity measurements.
Industry leading performance up to 6000V. Safety Certified.
Signal fidelity for serial bus PHY measurements.
Analog Channels : 1 - 2
Sample Rate : 250 MS/s - 2 GS/s
Bandwidth : 25 MHz - 250 MHz
Vertical Resolution : 14-bit
Record Length : 16 MSa/ch
Output Frequency Range : 25 MHz - 250 MHz
Starting Price : Rs 256,000
Analog Channels : 2
Sample Rate : 125 MS/s - 300 MS/s
Bandwidth : 25 MHz - 60 MHz
Vertical Resolution : 14-bit
Record Length : 8k points - 1M points
Output Frequency Range : 25 MHz - 60 MHz
Starting Price : Rs 78,200
Analog Channels : 1
Sample Rate : 250 MS/s
Bandwidth : 20 MHz
Vertical Resolution : 14-bit
Record Length : 128k points
Output Frequency Range : 20 MHz
Starting Price : Rs 178,000
Output frequency: up to 4GHz
Sample rate: 298 S/s - 5 GS/s
Memory: 2 GS/channel
Channels: Up to 8
Vertical resolution: 16 bits
·-70 dBc spurious free dynamic range
Output frequency: up to 20GHz
Sample rate: 50 GS/s
Memory: 2 GS/channel, 32 GS (Optional)
Resolution: 10 bits
-80 dBc spurious free dynamic range
Benchtop performance meets definitive portability with the industry’s highest fidelity, lowest noise real time spectrum analyzer, at an amazingly low price.
Whether you’re testing your baseband design for IoT or just for simple EMI sniffing, you should have the 3 Series MDO readily available on your bench. Unlike other oscilloscopes that offer software processed FFT “spectrum analysis”, the 3 Series has a unique true hardware spectrum analyzer built right in with superior RF test performance and guaranteed RF specifications.
Starting Price : Rs441,000
Real-time situational awareness in a rugged, portable form factor, the industry’s best for scanning, analyzing, and recording Radio Frequency signals when you need to, where you need to.
Starting Price : Rs918,000
Ideal for cramped spaces in the lab or production line, the RSA600 series provides advanced capture, identify and analyze capabilities utilizing the power of your PC in a compact form factor.
Starting Price : Rs965,000
Accelerate troubleshooting and analysis with best in class RF performance in a mid-range real-time Spectrum Analyzer.
Scan RF signals faster with flexibility to record, stream and analyze data in real time, at full bandwidth.
A fully integrated solution to characterize materials, processes and semiconductor devices
Waveform generation at 50 GSample/s and 10 bits resolution
Flexible acquisition with bandwidth up to 70 GHz at 200 GSamples/s
Single output, standalone electronic loads with 200W, 250W and 750W models.
2450-EC, 2460-EC and 2461-EC have been discontinued. However, the electrochemistry testing functionality is still available through purchasing the EC-UPGRADE option to any 2450, 2460 or 2461 instrument.
To find out more on how to install EC-UPGRADE to your SMU instrument,
A fully integrated solution to characterize materials, processes and semiconductor devices